Development & Implementation of Smart Vehicle Over Speeding Detector using IoT

Also Available Domains IOT|Image Processing|Arduino

Project Code :TEMBMA2779

Objective

The main objective of the project is to monitor vehicle speed and if vehicle exceeds speed limit, then the vehicle's image will be captured and forward to concern officials by using IoT technology

Abstract

Over speeding is one of the most common traffic violations. Generally, over speeding is the result of restless and bad behavior of drivers. As the accident rates are increasing it is important to develop and implement a system which can automatically detect and report over speeding to the traffic control authorities as early as possible. Nearly all the roads are marked with speed limits depending upon the size of moving vehicles and heaviness of traffic, but some drivers habitually ignore this speed limit. The advancement in technology has replaced most of the manual or semi-automatic systems with an automated system. One of the main causes for accidents all over the world is rash driving. The traffic has increased in many folds but the system of monitoring the speed has been compromised. Rash driving causes severe risk not only to the driver & passenger but also to general public.

Speed increase multiplies the hazard of accident and the risk of injury during the accidents. At greater speed the vehicle needs a larger distance to stop. The need of hour is to develop a system that will detect and report the over speed of vehicles by sending a mail of the drivers captured image.

Keywords: Camera, Raspberry Pi, IOT.

NOTE: Without the concern of our team, please don't submit to the college. This Abstract varies based on student requirements.

Block Diagram

Specifications

Hardware Requirements:

  • Raspberry Pi
  • Camera
  • 5V Adapter
  • GPS
  • Connecting wires

Software Requirements:

  • VNC Viewer
  • NOOBS Software
  • Python3 IDE
  • Fritzing
  • SMTP Server
  • Third Party server

Learning Outcomes

  • Raspberry Pi Pin diagram and Architecture
  • How to install NOOBS Software
  • Setting up and Installation procedures for Raspberry Pi
  • How to connect Raspberry Pi through VNC viewer?
  • Introduction to Python3 IDE
  • Commands in Python
  • Basic coding in Python
  • How to interface camera to Raspberry Pi?
  • Introduction to serial communication
  • Working of GPS module
  • How to connect GPS to Raspberry Pi?
  • Introduction to IOT
  • IOT architecture and its scope
  • How to send information from Raspberry Pi to a third party server?
  • How to send mail using Raspberry Pi?
  • About Project Development Life Cycle:
    • Planning and Requirement Gathering( software’s, Tools, Hardware components, etc.,)
    • Schematic preparation 
    • Code development and debugging
    • Hardware development and debugging
    • Development of the Project and  Output testing
  • Practical exposure to:
    • Hardware and software tools.
    • Solution providing for real time problems.
    • Working with team/ individual.
    • Work on Creative ideas.
  • Project development Skills
    • Problem analyzing skills
    • Problem solving skills
    • Creativity and imaginary skills
    • Programming skills
    • Deployment
    • Testing skills
    • Debugging skills
    • Project presentation skills
    • Thesis writing skills

Demo Video

mail-banner
call-banner
contact-banner
Request Video