Also Available Domains Image Processing|Arduino|Raspberry pi
The main objective of the project is to monitor vehicle speed and if vehicle exceeds speed limit, then the vehicle's image will be captured and forward to concern officials by using IoT technology
Over speeding is one of the most common traffic violations. Generally, over speeding is the result of restless and bad behavior of drivers. As the accident rates are increasing it is important to develop and implement a system which can automatically detect and report over speeding to the traffic control authorities as early as possible. Nearly all the roads are marked with speed limits depending upon the size of moving vehicles and heaviness of traffic, but some drivers habitually ignore this speed limit. The advancement in technology has replaced most of the manual or semi-automatic systems with an automated system. One of the main causes for accidents all over the world is rash driving. The traffic has increased in many folds but the system of monitoring the speed has been compromised. Rash driving causes severe risk not only to the driver & passenger but also to general public.
Speed increase multiplies the hazard of accident and the risk of injury during the accidents. At greater speed the vehicle needs a larger distance to stop. The need of hour is to develop a system that will detect and report the over speed of vehicles by sending a mail of the drivers captured image.
Keywords: Camera, Raspberry Pi, IOT.
NOTE: Without the concern of our team, please don't submit to the college. This Abstract varies based on student requirements.

Hardware Requirements:
Software Requirements: