Automated Street Light Control And Manhole Monitoring With Fault Detection & Reporting System For Municipal Department

Project Code :TEMBMA3278

Objective

The main objective of this project is to integrate Street Light controlling and Manhole monitoring for better Transportation

Abstract

This project represents the implementation and design function of Street light automation, Underground Drainage and Manhole Monitoring System using GSM technology. The vital considerations of this design are low cost, low maintenance, fast deployment, and high number of sensors, long life-time and high quality of service. The proposed model provides a system for automatic control of the street lights, street lights working condition, water level inside a manhole and also checks whether a manhole lid is open. In real time, this system can remotely monitor current states of the street lights, manholes and water level in them and will alert the officials early by sending a SMS through the GSM.

Keywords: WSN, Arduino, IOT, Street Light Management, Manholes Monitoring.

NOTE: Without the concern of our team, please don't submit to the college. This Abstract varies based on student requirements.

Block Diagram

Specifications

Hardware Requirements:

  • Arduino
  • IR Sensor
  • Ultrasonic Sensor
  • LDR Sensor
  • Relay
  • LED’s
  • LCD
  • Buzzer
  • GSM/ GPRS Module

Software Requirements:

  • Arduino IDE
  • Embedded C
  • Fritzing

Learning Outcomes

  • Arduino pin diagram and architecture
  • How to install Arduino IDE software
  • Setting up and installation procedure for Arduino
  • Introduction to Arduino IDE
  • Basic coding in Arduino IDE
  • Working of LDR sensor
  • Interface LDR sensor with Arduino?
  • Working of IR sensor
  • Interface IR sensor with Arduino?
  • Working of Ultrasonic sensor
  • Interface Ultrasonic sensor with Arduino?
  • Working of LCD
  • Interface LCD with Arduino?
  • Working of GSM
  • Interface GSM with Arduino?
  • Working of relay
  • Interface relay with Arduino?
  • Working of LED’s, Buzzer
  • Interface LED’s, Buzzer with Arduino?
  • Working of power supply
  • About Project Development Life Cycle:
    • Planning and Requirement Gathering (software’s, Tools, Hardware components, etc.,)
    • Schematic preparation 
    • Code development and debugging
    • Hardware development and debugging
    • Development of the Project and Output testing
  • Practical exposure to:
    • Hardware and software tools.
    • Solution providing for real time problems.
    • Working with team/ individual.
    • Work on Creative ideas.
  • Project development Skills
    • Problem analyzing skills
    • Problem solving skills
    • Creativity and imaginary skills
    • Programming skills
    • Deployment
    • Testing skills
    • Debugging skills
    • Project presentation skills

Demo Video

mail-banner
call-banner
contact-banner
Request Video