Smart Healthcare Patient Data Privacy and Security system using IOT

Project Code :TEMBMA2155

Objective

The main objective of the project is to create a heartbeat monitoring and temperature detection system using Raspberry Pi. The user may set the high level of heart beat limit as well as low level. After setting these limits, the system starts monitoring and as soon as patient heart beat goes above a certain limit, the system sends an alert. The data is uploaded to server continuously.

Abstract

The advancement and application of Wireless Body Area Networks (WBANs) are considered key research areas for improving healthcare quality. Pervasive healthcare monitoring provides rich contextual information to handle the odd conditions of chronically ill patients. Constant monitoring and an early medical response not only increase the life quality of elderly and chronically ill people but also help families and parents by providing high-quality health care to their young babies and paralyzed children. The importance of the WBANs cannot be very promising, as many applications and prototypes are already in progress. For example, some WBANs are dedicated to continuous observation of cognitive diseases such as Alzheimer’s, epilepsy and Parkinson’s disease. Another significant advancement in WBANs is the formation of tiny sensors implanted in the human body or integrated into fabric. While the importance of WBANs in healthcare is indubitable, the amount of data generated by these sensors is huge and demands more resources in terms of computation, memory, communication power, massive storage infrastructure, energy-efficient performance for processing, real-time monitoring and data analysis.

This system will update the health parameter readings of a patient to a third party server where doctor can view and if any parameter is about to cross its limit,then he can take an immediate action towards the patient.

Keywords: Raspberry pi, Heartbeat sensor, Temperature sensor, GSM Module, 16x2 LCD.

NOTE: Without the concern of our team, please don't submit to the college. This Abstract varies based on student requirements.

Block Diagram

Specifications

Hardware Requirements:

  • Arduino Uno
  • Heart beat sensor
  • Temperature sensor
  • RFID reader
  • LCD
  • GSM Module
  • Power supply
  • Connecting wires

Software Requirements:

  • Arduino IDE
  • Embedded C
  • Fritzing
  • Third Party server

Learning Outcomes

  • Raspberry pi Pin diagram and Architecture
  • Installation procedure for NOOBS software
  • How to install python3 IDE Software
  • Basic coding in python
  • Introduction to Serial Communication
  • Working RFID reader module
  • How to interface RFID reader module with Raspberry pi?
  • Working of temperature sensor
  • How to interface temperature sensor with Raspberry pi?
  • Working of heartbeat sensor
  • How to interface heartbeat sensor with Raspberry pi?
  • Working of 16x2 LCD
  • How to interface 16x2 LCD with Raspberry pi?
  • Working of GSM Module
  • How to interface GSM Module with Raspberry pi?
  • Introduction to IOT
  • IOT architecture and its scope
  • How to send data from Raspberry Pi to a third party server?
  • About Project Development Life Cycle:
    • Planning and Requirement Gathering( software’s, Tools, Hardware components, etc.,)
    • Schematic preparation 
    • Code development and debugging
    • Hardware development and debugging
    • Development of the Project and  Output testing
  • Practical exposure to:
    • Hardware and software tools. ,
    • Solution providing for real time problems,
    • Working with team/ individual,
    • Work on Creative ideas.
  • Project development Skills
    • Problem analyzing skills
    • Problem solving skills
    • Creativity and imaginary skills
    • Programming skills
    • Deployment
    • Testing skills
    • Debugging skills
    • Project presentation skills
    • Thesis writing skills

Demo Video

mail-banner
call-banner
contact-banner
Request Video
Final year projects