Heart Attack and Alcohol Detection Sensor Monitoring in Smart Transportation System using Internet of Things
Also Available Domains WSN|Arduino|PIC16F77A|Raspberry pi
Objective
The main objective of this project is to create a heartbeat monitoring and heart attack detection system using IoT. The user may set the high as well as low levels of heart beat limit. After setting these limits, the system starts monitoring and as soon as patient heart beat goes above a certain limit, the system sends an alert.
Abstract
This project presents an integrated system for vehicle safety and health monitoring, utilizing Arduino along with a range of components including a Heartbeat sensor, Alcohol sensor, Motor Driver, DC motor, GSM module, GPS module, and a Buzzer. The primary objective is to detect and respond to abnormal conditions such as alcohol consumption or irregular heartbeats in the driver, ensuring their safety and that of others on the road.
The Alcohol sensor continuously checks the alcohol level in the driver's breath. Upon detection, the system activates the Buzzer, halts the vehicle by controlling the DC motor through the Motor Driver, and simultaneously sends an alert message via the GSM module to predefined contacts. Similarly, the Heartbeat sensor monitors the driver's heartbeat, and upon detecting irregularities, the system initiates the same protocol as in the alcohol detection scenario to safeguard the driver and road users.
Additionally, the system incorporates GPS functionality to pinpoint the vehicle's location during emergencies. The integration of GSM enables the system to dispatch real-time alert messages, facilitating prompt assistance. This comprehensive approach to vehicle safety and driver health monitoring has the potential to significantly enhance road safety and save lives.
Keywords: Arduino, GSM, Alcohol Sensor, Heartbeat Sensor, Motor Driver, Buzzer , GPS
NOTE: Without the concern of our team, please don't submit to the college. This Abstract varies based on student requirements.
Block Diagram
Specifications
Hardware Requirements
- Arduino
- GPS
- GSM
- Alcohol Sensor
- Motor Driver
- Heartbeat Sensor
- Power Supply
- Motor
- Buzzer
Software Components:
- Arduino IDE
- Embedded C
Learning Outcomes
- Arduino pin diagram and architecture
- How to install Arduino IDE software
- Setting up and installation procedure for Arduino
- Introduction to Arduino IDE
- Basic coding in Arduino IDE
- Working of GSM
- Interface GPS , GSM with Arduino
- Working of power supply
- About Project Development Life Cycle:
- Planning and Requirement Gathering (software’s, Tools, Hardware components, etc.,)
- Schematic preparation
- Code development and debugging
- Hardware development and debugging
- Development of the Project and Output testing
- Practical exposure to:
- Hardware and software tools.
- Solution providing for real time problems.
- Working with team/ individual.
- Work on Creative ideas.
- Project development Skills
- Problem analyzing skills
- Problem solving skills
- Creativity and imaginary skills
- Programming skills
- Deployment
- Testing skills
- Debugging skills
- Project presentation skills
Related Projects
Paper Publishing
Request Call Back
Would you like to receive a free callback now?
Choose the best time for callback:
Leave your message and we will contact you as soon as possible
Disclaimer - Takeoff Edu Group Projects, are not associated or affiliated with IEEE, in any way. The IEEE Projects mentioned here are mentioned in the context of student projects, whose ideas are derived from IEEE publications, and not projects of or by IEEE.
