Paper PublishingElegant home with power saving, security, safety, remote controlling and auto control of water tank motor
Also Available Domains IOT|Embedded applications
Objective
The main objective of this project is to provide fully loaded security, safety and automated/manually controlled motors for pumping water into the house. A camera also been used to detect the burglar if any entered and alerts the owner
Abstract
Firstly there is no system to track the water in the tank. Then there comes a secondary problem that is when the water pump is started they have no idea when it gets filled up and sometimes there is a situation where the pump keeps on pumping water to the tank and the water starts spilling out from the tank.
There is wastage of energy as well as wastage of water. Initially the water starts to get pumped from the underground reservoir or from the underground water supply from the pipes to your water tank. So whenever the water starts to get filled in the tank it is in empty state and when the water level in the tank starts to rise up, it has to show that the tank level is almost empty .like it has to show half of the tank is filled and almost tank is full conditions also to alert the user.
Finally when it reaches to its top the indicator has to be mentioned that the water level in the tank is full. So by this project one can be alerted that the tank has been filled up .so by this project we have a chance of saving the electricity bill as well as over flow of water from the tank. By using this system we can control the home appliances remotely for that we are using TSOP IR receiver. We will do that by pressing a button in the remote.
Keywords: IOT, Remote control home appliance, IR receiver, Arduino UNO, Arduino Nano.
NOTE: Without the concern of our team, please don't submit to the college. This Abstract varies based on student requirements.
Block Diagram
Specifications
- Hardware Requirements:
- Arduino UNO
- Arduino Nano
- TSOP IR receiver
- IR Remote
- Ultrasonic sensor
- Gas sensor
- IR sensor
- GSM
- Relays
- DC pump
- Bulb
- CPU fan
- Connecting wires
- Software Requirements:
- Arduino IDE
- Embedded C
- Fritzing
- Third Party server
Learning Outcomes
- Arduino UNO Pin diagram and Architecture
- Arduino Nano Pin diagram and Architecture
- How to install arduino IDE Software
- Introduction to Arduino IDE
- Commands in Arduino
- How to install Libraries?
- Basic coding in arduino
- Working of relay
- How to interface relay with Arduino?
- How to interface IR, gas and ultrasonic sensors with Arduino UNO?
- How to interface IR receiver with Arduino Nano?
- Introduction to Serial Communication
- How to interface the GSM with Arduino UNO?
- How to control home appliance with IR remote?
- About Project Development Life Cycle:
- Planning and Requirement Gathering ( software’s, Tools, Hardware components, etc.,)
- Schematic preparation
- Code development and debugging
- Hardware development and debugging
- Development of the Project and Output testing
- Practical exposure to:
- Hardware and software tools.
- Solution providing for real time problems.
- Working with team/ individual.
- Work on Creative ideas.
- Project development Skills
- Problem analyzing skills
- Problem solving skills
- Creativity and imaginary skills
- Programming skills
- Deployment
- Testing skills
- Debugging skills
- Project presentation skills
- Thesis writing skills
Related Projects
Request Call Back
Would you like to receive a free callback now?
Choose the best time for callback:
Leave your message and we will contact you as soon as possible
Disclaimer - Takeoff Edu Group Projects, are not associated or affiliated with IEEE, in any way. The IEEE Projects mentioned here are mentioned in the context of student projects, whose ideas are derived from IEEE publications, and not projects of or by IEEE.
