Paper PublishingDesign of a Monitoring System Using Pill Bottle Mounted Wireless Sensors
Objective
The main objective of this project is to design a monitoring system for the elderly people and the victims of chronicle diseases, who need to take the medicines timely without missing and are suffering from dementia, which is forgetting things in their daily routine.
Abstract
In modern society, busy life has made people forget many things in day to day life. The elderly people and the people victims of chronicle diseases who need to take the medicines timely without missing are suffering from dementia, which is forgetting things in their daily routine. There are occasions when patients remember to take medicines at the stipulated time but forget which pill has to be taken at that particular time. It is difficult for doctors/paramedics/attenders to monitor patients round the clock.
In order to avoid these problems, we have implemented this patient medicine reminder system. The system allows the user to enter the prescribed timings, at which the patient has to take the medication. The microcontroller continuously reads the time from the RTC. When the timings read from the RTC equals the timings stored, the system displays the list of medicines to be taken at that particular prescribed time through Speaker and Message will be sent. Here we are placing Magnetic sensor in the Pill Box to check whether the person taken medicine or not. Load cell will measures the weight of the medicine box.
Keywords: Arduino Uno, Magnetic sensor, RTC, LCD, GSM, APR9600 voice module, LOAD cell, Speaker, power supply
NOTE: Without the concern of our team, please don't submit to the college. This Abstract varies based on student requirements.
Block Diagram
Specifications
Hardware Requirements:
- Arduino
- RTC module
- Switch
- Magnetic sensor
- LCD
- 4-Bit PCB Potentiometer
- GSM
- APR9600 voice module
- Speaker
- 12V 1A Adapter
- 5V Adapter
Software Requirements:
- Arduino IDE
- Fritzing
- Embedded C
Learning Outcomes
- Arduino pin diagram and architecture
- How to install Arduino IDE software
- Setting up and installation procedure for Arduino
- Introduction to Arduino IDE
- Basic coding in Arduino IDE
- Working of Magnetic sensor
- Interface Magnetic sensor with Arduino?
- Working of RTC
- Interface RTC with Arduino?
- Working of Switch
- Interface Switch with Arduino?
- Working of LCD
- Interface LCD with Arduino?
- Working of GSM
- Interface GSM with Arduino?
- Working of APR9600 voice module
- Interface APR9600 voice module with Arduino?
- Working of Speaker
- Interface Speaker with Arduino?
- Working of Power supply
- About Project Development Life Cycle:
- Planning and Requirement Gathering( software’s, Tools, Hardware components, etc.,)
- Schematic preparation
- Code development and debugging
- Hardware development and debugging
- Development of the Project and Output testing
- Practical exposure to:
- Hardware and software tools.
- Solution providing for real time problems.
- Working with team/ individual.
- Work on Creative ideas.
- Project development Skills
- Problem analyzing skills
- Problem solving skills
- Creativity and imaginary skills
- Programming skills
- Deployment
- Testing skills
- Debugging skills
- Project presentation skills
- Thesis writing skills
Request Call Back
Would you like to receive a free callback now?
Choose the best time for callback:
Leave your message and we will contact you as soon as possible
Disclaimer - Takeoff Edu Group Projects, are not associated or affiliated with IEEE, in any way. The IEEE Projects mentioned here are mentioned in the context of student projects, whose ideas are derived from IEEE publications, and not projects of or by IEEE.
